PLACID Accelerometer PQV 1050
SINGLE AXIS ACCELEROMETERS
Basics
The PLACID PQV 1050 is a multi-purpose IEPE accelerometer.
Connectivity
The PLACID PQV 1050 is an IEPE powered accelerometer. As the output impedance of our IEPE accelerometers is between 100-300 Ohm, no special low-noise cable are required.
Uses
The PLACID PQV 1050 is used for all forthcoming vibration measurements where only a 1-axis signal is required
Individual calibration
All PLACID accelerometers are being calibrated in a controlled laboratory environment using traceable calibration equipment complying with ISO17025 standards.
We recommend that all PLACID accelerometers are re-calibrated every year to guarantee an optimized usage.
PLACID Traceable Calibration is performed by our qualified staff and under controlled conditions according to the procedures and standards such as ISO17025.
Quality
All PLACID accelerometers are made of high-quality materials that will ensure long stability and durability, even in harsh condition. PLACID offers 2 years warranty against defective materials and workmanship.
All our accelerometers are made from Stainless steel.
| DATASHEET PLACID PQV 1050 ACCELEROMETER | ||
| General Characteristic | ||
| Measurement Range(g) | 0.5—12000 Hz | |
| Measuring Axis(single/triaxial) | Single | |
| Voltage Sensitivity(±5%) | 100mv/g | |
| Maximum Acceleration | ±50 g | |
| Shock (OverloadLimit) | 1500g pk | |
| Frequency response | ±5% | 10000 Hz |
| ±10% | 12000 Hz | |
| Amplitude Response | ±5% | 10000 Hz |
| ±10% | 12000 Hz | |
| Resonance Frequency | 30kHz | |
| Non-Linearity | 1% | |
| Temperature range( | -40 to +120℃ | |
| Transverse Sensitivity | ≤5% | |
| Output Impedance | <100Ω | |
| Output BiasVoltage | 8-12VDC | |
| Grounding | Cable shielding layer | |
| Spectral Noise | ≤300uv | |
| Sensing elements | Piezoelectric ceramics | |
| Sensing Geometry | Hex 17mm Height 36mm | |
| Datasheet PLACID PQV 1050 Accelerometer | |
| Power Requirement | |
| Excitation Voltage(V) | Typical 24VDC |
| Constant CurrentExcitation | Typical 4mA |
| Supply Voltage(Unloaded) | 18-24VDC |
| Constant CurrentSupply | 2-20mA |
| Physical Characteristics | |
| Housing Material | Stainless Steel |
| Sealing | Crimping |
| Weight | 31 gm |
| ElectricalConnector | TNC |
| Electrical ConnectionPosition | Top |
SPECIFICATION
|
Models / Unit |
Type |
Sensitivity (mV/g) |
Measurement Range (g) |
Transverse Sensitivity |
Frequency Range (Hz) |
Temperature Range (C) |
Excitation Voltage (V) |
Housing Material |
Cable Type |
| PQV1050 |
Single |
100 |
+/- 50 |
≤5% |
0.5 – 12000 |
-40 – +120 |
+12 – +24 (IEPE) |
Stainless Steel |
TNC |
| PQV1050-4 | 40 | +/- 50 | ≤5% | 0.5 – 12000 | -40 – +120 | Stainless Steel | TNC | ||
| PQV1500S | 10 | +/- 500 | ≤5% | 0.5 – 10000 | -40 – +120 |
+12 – +30 (IEPE) |
Stainless Steel | M5 | |
| PQV1500T | 10 | +/- 500 | ≤5% | 0.5 – 10000 | -40 – +120 | Stainless Steel | M5 | ||
| PQV3010 |
Triaxial
|
500 | +/- 10 | ≤5% | 0.5 – 5000 | -40 – +125 |
+12 – +24 (IEPE) |
Stainless Steel | M5 |
| PQV3050 | 100 | +/- 50 | ≤5% | 0.5 – 7000 | -40 – +125 | Stainless Steel | M5 | ||
| PQV3500 | 10 | +/- 500 | ≤5% | 0.5 – 10000 | -40 – +125 | Stainless Steel | M5 |
PLACID is able to customize different products, will quote and provide delivery date according to customer demand
