PLACID Accelerometer PQV 1500S
SINGLE AXIS TOP-EXIT CONNECTOR
Basics
The PLACID PQV 1500S is a multi-purpose IEPE accelerometer.
Connectivity
The PLACID PQV 1500S is an IEPE powered accelerometer. As the output impedance of our IEPE accelerometers is between 100-300 Ohm, no special low-noise cable are required.
Uses
The PLACID PQV 1500S is used for all forthcoming vibration measurements where only a 1-axis signal is required
Individual calibration
All PLACID accelerometers are being calibrated in a controlled laboratory environment using traceable calibration equipment complying with ISO17025 standards.
We recommend that all PLACID accelerometers are re-calibrated every year to guarantee an optimized usage.
PLACID Traceable Calibration is performed by our qualified staff and under controlled conditions according to the procedures and standards such as ISO17025.
Quality
All PLACID accelerometers are made of high-quality materials that will ensure long stability and durability, even in harsh condition. PLACID offers 2 years warranty against defective materials and workmanship.
All our accelerometers are made from Stainless steel.
DATASHEET PLACID PQV 1500S ACCELEROMETER
Performance | |
Measurement Range (g) | +/- 500 |
Frequency range (Hz) | 0.5 – 10000 Hz |
Sensitivity | 10 mV/g |
Resonant Frequency | 35 kHz |
Maximum lateral
sensitivity ratio |
≤ 5% F.S |
Environmental | |
Temperature range (Celsius) | -40 – +120 |
Electrical | |
Excitation Voltage (V) |
12 to 30 VDC
(Typical value:24 VDC) |
Constant current excitation |
2 to 20 mA
(Typical Value: 4 mA) |
Output bias voltage | 8 to12 VDC |
Output Impedance | ≤150 Ω |
Physical | |
Size | hex 14 mm, height 22 mm |
Mounting thread | M5 |
Electrical connector | M5 |
Electrical connection Position | Side |
Weight | 22g |