PLACID PNP41 Preamplifier
The PLACID PNP41 1/4” Preamplifier is a robust preamplifier designed to be used for acoustic measurements with condenser microphones.
The self-noise is very low, it has a wide dynamic range and frequency response.
Technology
Design
All PLACID ICCP microphone preamplifiers are designed for 1⁄4”, 1⁄2” and 1” condenser microphones.
The preamplifiers are optimized to have a flat frequency response which will ensure high quality acoustic measurements.
Self-noise
The electrical circuit has especially been designed to ensure a low self-noise level which typically be much lower than the self-noise of the microphone cartridge.
Impedance
The PLACID PNP41 input impedance is over 5 W , the output impedance is less than 110 W.
Daily usage
- General-purpose preamplifier
- High-frequency measurements
- High-pressure measurements
| DATASHEET PLACID PNP41 PREAMPLIFIER | ||
| Frequency Response (Ref. 250 Hz, 0.2 dB) | Hz | 5.0 to 100 kHz |
| Slew Rate | V/μs | 2.95 |
| Input Impedance | G Ω | ➢ 1.5 |
| Output Impedance | Ω | < 110 |
| Max Output Voltage | Vrms | 8.0 |
| Noise (A-Weighted) | μV | < 2.5 |
| Noise (Linear 20 Hz – 20 kHz) | μV | < 6.0 |
| Gain | dB | – 0.18 |
| DC – offset, minimum | V | 15 |
| DC- offset, maximum | V | 24 |
| Power Requirement | mA | ICP 2 to 20 |
| Temperature operational range | Celcius | – 40 to 100 |
| Temperature storage range | Celcius | -40 to 100 |
| Humidity operational range noncondensing | % Rh | 0 to 98 |
| Output Connector Type | SMB | |
| Diameter | Inch | ¼ |
| Weight | Gram | 6.5 |
| Length | mm | 58.0 |
Please Click and Download this product datasheet for further information
