Placid Sound intensity probe PSQ21

Placid Sound intensity probe PSQ21

PSQ21 sound intensity probe is a face-to-face sound intensity probe, including 8.5mm, 12mm and 50mm fixed isolators for microphone isolation. This design allows the user to change the microphone spacing without removing the probe.

Sound intensity measurement can provide the amplitude and direction information of sound energy in the sound field, and is widely used in sound power measurement, sound absorption, sound transmission, noise source identification, sound source location and other fields.

PLACID PSQ21 features:

  • Face to face sound intensity probe
  • Including 5mm, 12mm and 50mm fixed isolators for microphone isolation

PLACID PSQ21 Sound intensity probe datasheet

Compare

PSQ21 sound intensity probe is a face-to-face sound intensity probe

Introduction

Sound intensity measurement can provide the amplitude and direction information of sound energy in the sound field and is widely used in sound power measurement, sound absorption, sound transmission, noise source identification, sound source location and other fields.

The sound intensity measurement method is to use two microphones close to each other to measure the sound pressure and particle vibration velocity at the same time. In order to minimize the impact on the sound field, it is necessary to accurately define the acoustic distance between the two microphones of the sound intensity probe. To ensure the  highest  measurement  accuracy,  the distance between the most appropriate microphones should be defined for specific test conditions. When testing low-frequency band under strong reverberation conditions, the interval should be large, while when testing high-frequency band, the interval between microphones should be small.

Specification

MICROPHONE CAPSULE
ModelPMP21
Nominal diameter½”
Microphone typePrepolarization
Sound FieldFree Field
Sensitivity50mV/Pa
PREAMPLIFIER
ModelPNP41
Nominal Diameter¼”
OTHER
 

Adapter

1/2″ microphone capsule to 1/4″ preamplifier adapter
 

Measurement range (1/3 octave)

•     8.5mm spacing:250 Hz to 6.3k Hz

•     12 mm spacing:160 Hz to 5kHz

•     50 mm spacing:50 Hz to 1.25kHz

Output connector4-Pin Lemo
Connects cablesLength 2m, 4-Pin Lemo to 2× BNC
Operating temperature range-20 to + 80°C
Weight0.5 kg

FREQUENCY RESPONSE

PSQ21 SOUND INTENSITY PROBE FREQUENCY RESPONSE

PACKING LIST

NOITEMDESCRIPTION
1PSQ21Sound Intensity Probe
2MicrophoneQuantity 2x
3Spacing Bar12 mm and 50 mm
4Cable4-Pin Lemo to 2× BNC
5Allen keyQuantity 1
6User ManualHardware product manual
7CertificateDate of manufacture,etc
8Packing boxAluminum box

Please Click and Download this product datasheet for further information